• FFProduct Wizard 4000 Wide

WIZARD 4000®

Advanced Digital Weight Indicator

  • Description

  • Technical Specs

  • Scales/Sensors

  • Bid Specs

  • Drawings

  • Brochures

  • Support

  • Images/Videos

  • Related Items

Wizard 4000 General Description

The Wizard 4000+ is an extremely powerful chemical inventory management system for monitoring chlorine gas, sodium hypochlorite, hydrofluosilicic acid and all other chemicals used in water treatment. The Wizard 4000+ helps insure a safe process and a safe plant by providing essential information such as current chemical feed rate, how much chemical has been fed, and how much chemical remains. The Wizard 4000+ can be used with any of our scales and ultrasonic sensors, easily converts any existing Force Flow hydraulic scale to a digital multi-function system and can be used with most electronic load cell based weighing systems.

Because the Wizard 4000+ has four separate channels, it can be used to simultaneously monitor levels in up to four separate tanks. This means that you can monitor each tank independently as well as get the combined totals for all the tanks. The "Daily Usage" data logging function allows for easy record keeping and a "Days Until Empty" function makes it simple to anticipate tank refilling and chemical reorder points. Flexible software allows the user to monitor chemicals in Lbs, Kgs, Gallons, Liters or Percent of Full. 

A "Feed Rate" function allows the operator to monitor chemical feed rates, which can be alarmed or transmitted via a 4-20 ma signal. This important feature allows early warning of dangerously low or high feed rate conditions and therefore prevents hazardous under or overdosing of chemicals to your water supply.

The Wizard provides up to four set points, each triggering dry or solid-state relays. These relays can be programmed for high or low level alarms, automating chemical transfer from bulk to day tanks or diluting chemicals down from their full strength. These features prevent the hazards of running out of chemicals or accidental overfilling of tanks.

Wizard 4000 Technical Specs

CHANNELS : Up to 4
INPUT : mV/V (Scale) or 4-20mA (Ultrasonic)
POWER : 110 or 240 VAC, 5w
OUTPUTS : Up to 4, 4-20mA
RELAYS : Up to 4, Solid State or Dry Contact
DISPLAY : Dual Line, 16 Characters/Line, Alphanumeric w/ Backlighting
INCREMENTS : 0.1 lb/kg minimum
UNITS : Lbs, Kgs, Gallons, Liters
KEYPAD : 10 Function Keys, 10 Numeric Keys
RESOLUTION : Up to 12,000 counts
ENCLOSURE : NEMA 4X (IP67), Structural Foam Molded








The Wizard 4000 is compatible with the following Scales/Sensors:


Solo G2 Digital Weight Indicator Wizard 4000 Digital Weight Indicator Century Dial Weight Indicator Solo XT Weight Indicator
Chlor Scale Chlor Scale 150 Chem Scale IBC Tote Bin Scale
Solo XT Weight Indicator Hypo Track Weight Indicator Hypo Track Weight Indicator Hypo Track Weight Indicator
Drumm Scale Carboy Scale SpillSafe Scale Volumetric Feeder Scale




Wizard 4000 Typical Written Specs




Wizard 4000 Drawings




Wizard 4000 Brochures

Wizard 4000 Technical Support

For Technical Support, call our FACTORY SERVICE HELP DESK at 1-800-893-6723 (within U.S.) or 925-686-6700.

From the initial writing of a specification through the installation and operation of the equipment, 100% satisfaction is our goal. At FORCE FLOW, we know that a superior customer service and support team is crucial to the success of our customers and the success of our company. Following are some of the services that we offer:

Performance Guarantee
With the purchase of every Force Flow product comes our exclusive Performance Guarantee. If you are unhappy about the performance of one of our products in your chlorination or chemical feed application, you may contact your local distributor and request they begin the restock,refund or exchange process. Under the Performance Guarantee, for 30 days after receiving the product, you may return or exchange it for full purchase price refund or credit towards another Force Flow product. To qualify, all Performance Guarantee refunds or exchanges must be pre-approved by the factory service manager before returning the equipment to the factory.

FORCE FLOW warrants every single one of our products for a period of five years. If a failure occurs within the said period, the warranty extends from the date of FORCE FLOW's shipment, and liability is limited to repayment of the purchase price, repair or replacement of the equipment. All warranty work must be returned to the factory or a center designated by FORCE FLOW.

Our policy is to get all repairs, warranty work and retrofits completed and shipped back to the customer within 48 hours of receiving them at our factory. Trained technicians and a large parts inventory makes this happen. We understand that there is nothing more frustrating than sending something back to the manufacturer and wondering when you will see it again. Two day turnaround—that is our policy! For prompt service, call our FACTORY SERVICE HOTLINE at 1-800-893-6723 (within U.S.) or 925-686-6700.

Technical and Application Support
FORCE FLOW factory engineers have strong technical backgrounds with many years of process weighing experience in both chlorine and chemical feed applications. If you require technical information, application support or help with a custom project, please contact an application engineer at our HELP HOTLINE at 1-800-893-6723.

Wizard 4000 Related Items