TYPICAL SPECIFICATION

ELECTRONIC INDICATOR

SOLO® G2

Scale shall be of the single load cell design.   Weight shall be transferred via lever(s) to a single load cell of the shear beam strain gauge type.  Flexible cable shall lead from the cell to allow easy remote installation of the readout and shall be _____ ft. (20'/6m standard) in length.

Indicator shall monitor__________(1 or 2 ) channels. The remote mounted LCD indicator shall carry CE marking and shall be housed in a NEMA 4X, UL approved enclosure. All operations shall be keypad operated & menu driven in order to avoid compromising the NEMA 4X seal at anytime.  The alphanumeric LCD readout shall have backlighting for readability in low light conditions.  Power requirement shall be ______________( 110 VAC, 220 VAC or 24 VDC)

A 6 digit numerical display shall give operator the ability to monitor chemical by weight (lb or kg) or volume (gallons or liters).  A bar graph display shall read 0-100% for the net contents.  A dual mode TARE key shall allow user to enter the tare weight of the vessel or enter the net weight of the chemical depending on application needs. A diagnostics menu shall allow recalibration without the need to apply field test weights.  A user adjustable filter function shall stabilize display in the event of vibration from pumps or mixers in the immediate vicinity of the scale.

Indicator shall output net weight via a 4-20mA signal and full scale output shall be user adjustable via the keypad.  Indicator shall have four adjustable set points to display low or high level conditions on the indicator. 

           OPTIONAL:    Set points shall activate ______ (up to four) Form C Dry Contact Relays,                                    2A@30VDC, 60W Max Power, 220VDC Max Voltage